79 gt connectors ? accessories 10-40450, 10-36675, 10- 580649 sealing gaskets plain flat gasket the amphenol ? plain flat gasket of synthetic rubber material is provided to take complete advantage of waterproof and pressure sealing features. it is for use with the flange mounted receptacle. shielding gasket this flat gasket is provided to give the maximum in connector performance. its special feature is in providing the maximum radio shielding under difficult conditions of high receiver sen- sitivity and low signal strength while retaining the sealing characteristics of the plain gasket. this gasket is for use with the flange mounting receptacle. low temperature gasket this gasket is provided for applications where the major requirement is resistance to the injurious effects of extremely low temperature. even at tem peratures as low as ?67f this gasket retains its resiliency and will seal a pressure differen- tial of 30 psi. additional versions of gaskets are available including low smoke zero halogen, and also high temperature and conduc- tive types. consult amphenol l ndustrial operations, sidney ny, for further information. installation dimensions ms shell size a .010 front panel versions b +.016 ? .000 rear panel version b +.016 ? .000 c +.016 ? .000 d .010 10sl .719 .625 .724 1.000 .172 14s .906 .875 .976 1.188 .172 16s .969 1.000 1.087 1.281 .172 16 .969 1.000 1.087 1.281 .172 18 1.063 1.125 1.220 1.375 .203 20 1.156 1.250 1.354 1.500 .203 22 1.250 1.375 1.480 1.625 .203 24 1.375 1.500 1.618 1.750 .203 28 1.563 1.750 1.846 2.000 .203 32 1.750 2.000 2.110 2.250 .219 36 1.938 2.188 2.354 2.500 .219 40 2.188 2.438 2.587 2.750 .219 installation dimensions ms shell size a 0.2 front panel versions b +0.4 ?0.0 rear panel version b +0.4 ?0.0 c +0.4 ?0.0 d 0.2 10sl 18.2 15.9 18.4 25.4 4.36 14s 23.0 22.2 24.8 30.2 4.36 16s 24.6 25.4 27.6 32.5 4.36 16 24.6 25.4 27.6 32.5 4.36 18 27.0 28.57 31.0 35.0 5.15 20 29.4 31.75 34.4 38.1 5.15 22 31.8 34.9 37.6 41.2 5.15 24 34.9 38.1 41.1 44.5 5.15 28 39.7 44.45 46.9 50.8 5.15 32 44.5 50.8 53.6 57.2 5.56 36 49.2 55.57 59.8 63.5 5.56 40 55.6 61.92 65.7 69.9 5.56 order data for front panel mount gaskets front panel plain version front panel shielding version front panel low temperature version front panel low smoke zh version 10-40450-10 10-40450-10s 10-36675-10 ls-40450-10 10-40450-14 10-40450-14s 10-36675-14 ls-40450-14 10-40450-16 10-40450-16s 10-36675-16 ls-40450-16 10-40450-18 10-40450-18s 10-36675-18 ls-40450-18 10-40450-20 10-40450-20s 10-36675-20 ls-40450-20 10-40450-22 10-40450-22s 10-36675-22 ls-40450-22 10-40450-24 10-40450-24s 10-36675-24 ls-40450-24 10-40450-28 10-40450-28s 10-36675-28 ls-40450-26 10-40450-32 10-40450-32s 10-36675-32 ls-40450-32 10-40450-36 10-40450-36s 10-36675-36 ls-40450-36 10-40450-40 10-40450-40s 10-36675-40 ls-40450-40 order data for rear panel mount gaskets rear panel plain version rear panel low smoke zh version 10-580649-11 ls-580649-11 10-580649-14 ls-580649-14 10-580649-16 ls-580649-16 10-580649-18 ls-580649-18 10-580649-20 ls-580649-20 10-580649-22 ls-580649-22 10-580649-24 ls-580649-24 10-580649-26 ls-580649-26 10-580649-32 ls-580649-32 10-580649-36 ls-580649-36 10-580649-40 ls-580649-40 c a c a b d 4 holes .031 .010 .08 0.3 mm .020 .004 0.5 0.1 mm shielding .031 .010 0.8 0.3 mm low temperature
80 gt connectors ? accessories receptacle protection caps * to complete order number, add shell size and suffix number. for example, shell size 11 with olive drab cadmium plate would be 10-580902-113. all dimensions for reference only. inches shell size d + .020 ? .000 l max. n max. ll approx. 11 .173 .700 .905 5.000 14 .173 .700 1.181 5.000 16 .173 .700 1.280 5.000 17 .173 .900 1.280 5.000 18 .173 .900 1.457 5.000 20 .173 .900 1.594 5.000 22 .173 .900 1.713 5.000 24 .173 .900 1.850 5.000 28 .220 .900 2.126 7.480 32 .261 .900 2.382 7.480 36 .261 .900 2.638 7.480 40 .261 .900 2.874 7.480 millimeters shell size d + 0.5 ? 0.0 l max. n max. ll approx. 11 4.4 17.8 23.0 127 14 4.4 17.8 30.0 127 16 4.4 17.8 32.5 127 17 4.4 22.9 32.5 127 18 4.4 22.9 37.0 127 20 4.4 22.9 40.5 127 22 4.4 22.9 43.5 127 24 4.4 22.9 47.0 127 28 5.6 22.9 54.0 190 32 5.6 22.9 60.5 190 36 5.6 22.9 67.0 175 40 5.6 22.9 73.0 190 finish suffix black anodize -xxz olive drab cadmium plate -xx3 olive drab cadmium nickel base -xx9 electroless nickel -xxg green zinc cobalt -xxu black zinc cobalt -xxy ? protective metal caps which seal the front of receptacles ? includes a chain for retention of the cap at the required location ? for receptacles: gt00, 01, 02, 020, 030, 070 * 10-580902-xxx d ll l n
81 gt connectors ? accessories plug protection caps ? protective metal caps which seal the front of plugs ? includes a chain for retention of the cap at the required location ? for plugs: gt06, 08 * to complete order number, add shell size and suffix number. for example, shell size 11 with olive drab cadmium plate would be 10-580903-113. all dimensions for reference only. inches shell size d + .020 ? .000 l max. n max. ll approx. 11 .157 .945 .807 5.000 14 .157 .945 1.059 5.000 16 .157 .945 1.169 5.000 17 .157 .945 1.169 5.000 18 .157 .945 1.303 5.000 20 .189 1.260 1.437 5.520 22 .189 1.260 1.563 5.520 24 .189 1.260 1.701 5.520 28 .220 1.260 1.929 7.480 32 .261 1.260 2.193 7.480 36 .261 1.260 2.437 7.480 40 .261 1.260 2.665 7.480 millimeters shell size d + 0.5 ? 0.0 l max. n max. ll approx. 11 4.0 24 20.5 127 14 4.0 24 26.9 127 16 4.0 24 29.7 127 17 4.0 24 29.7 127 18 4.0 24 33.1 127 20 4.8 32 36.5 140 22 4.8 32 39.7 140 24 4.8 32 43.2 140 28 4.8 32 49.0 190 32 5.6 32 55.7 190 36 5.6 32 61.9 190 40 5.6 32 67.7 190 finish suffix black anodize -xxz olive drab cadmium plate -xx3 olive drab cadmium nickel base -xx9 electroless nickel -xxg green zinc cobalt -xxu black zinc cobalt -xxy * 10-580903-xxx d ll n l
82 gt connectors ? accessories ms3057-a style cable clamp all dimensions for reference only. inches part number used with shell size used with bushing b d g f v thread class 2b 97-3057-1004 10sl ms3420-4 .315 .395 .812 .866 .6250-24 unef 97-3057-1007 14s ms3420-6 .442 .395 .875 1.063 .7500-20 unef 97-3057-1008 16 - 16s ms3420-8 .568 .395 .945 1.145 .8750-20 unef 97-3057-1010 18 MS3420-10 .633 .395 .945 1.244 1.0000-20 unef 97-3057-1012 20 - 22 ms3420-12 .758 .395 .945 1.475 1.1875-18 unef 97-3057-1016 24 - 28 ms3420-16 .948 .395 1.031 1.700 1.4375-18 unef 97-3057-1020 32 ms3420-20 1.256 .460 1.094 2.055 1.7500-18 uns 97-3057-1024 36 ms3420-24 1.380 .520 1.157 2.265 2.0000-18 uns 10-824810-028 40 ms3420-28 1.625 .520 1.685 2.683 2.2500-16 un millimeters part number used with shell size used with bushing b d g f 97-3057-1004 10sl ms3420-4 8.0 10.0 20.6 22 97-3057-1007 14s ms3420-6 11.0 10.0 22.2 27 97-3057-1008 16 - 16s ms3420-8 14.4 10.0 24.0 29 97-3057-1010 18 MS3420-10 16.1 10.0 24.0 32 97-3057-1012 20 - 22 ms3420-12 19.2 10.0 24.0 37 97-3057-1016 24 - 28 ms3420-16 24.1 10.0 26.2 43 97-3057-1020 32 ms3420-20 31.9 11.7 27.8 52 97-3057-1024 36 ms3420-24 35.0 13.2 29.4 58 10-824810-028 40 ms3420-28 41.3 13.2 42.8 68 ? concentric cable clamps, insure strain relief and central location of the cable ? can be used with bushing ms3420 b q f e v g d
83 gt connectors ? accessories ms3420 bushing all dimensions for reference only. inches part number used with cable clampabcd ms3420-3 m85049/41-3a .130 .210 .379 2.875 ms3420-4 m85049/41-4a .220 .302 .505 2.750 ms3420-6 m85049/41-6a .312 .427 .619 2.625 ms3420-8 m85049/41-8a .437 .552 .744 2.500 MS3420-10 m85049/41-10a .562 .615 .889 2.375 ms3420-12 m85049/41-12a .625 .740 1.084 2.250 ms3420-16 m85049/41-16a .750 .927 1.314 2.125 ms3420-20 m85049/41-20a .937 1.240 1.598 2.000 ms3420-24 m85049/41-24a 1.250 1.365 1.847 1.875 ms3420-28 m85049/41-28a 1.375 1.614 2.085 1.750 millimeters part number used with cable clampabcd ms3420-3 m85049/41-3a 3.30 5.3 9.60 73.0 ms3420-4 m85049/41-4a 5.58 7.7 12.80 69.8 ms3420-6 m85049/41-6a 7.92 10.8 15.70 66.8 ms3420-8 m85049/41-8a 11.09 14.0 18.90 63.5 MS3420-10 m85049/41-10a 14.27 15.6 22.58 60.3 ms3420-12 m85049/41-12a 15.87 18.8 27.50 57.1 ms3420-16 m85049/41-16a 19.05 23.5 33.40 53.9 ms3420-20 m85049/41-20a 23.79 31.5 40.60 50.8 ms3420-24 m85049/41-24a 31.75 34.7 46.90 47.6 ms3420-28 m85049/41-28a 34.92 41.0 52.90 44.4 ? bushing of synthetic rubber to be used with cable clamps for protection of the cable or wires ? can be telescoped for smaller cable diameters a c d 1.6mm .062 in. b
84 gt connectors ? accessories ms3057-c style (10-350349) cable clamp part number used with shell size a thread class 2b in inches v thread class 2a in inches used with bushing bushing opening inches busing opening millimeters open closed open closed 10-350349-123 10sl .6250-24 unef 6-32 unc ms3420-4a .219 .010 5.56 0.25 10-350349-143 14s .7500-20 unef 6-32 unc ms3420-6a ms3420-4a .312 .219 .114 .020 7.93 5.56 2.89 0.50 10-350349-163 16 & 16s .8750-20 unef 6-32 unc ms3420-8a ms3420-6a .437 .312 .220 .085 11.10 7.93 5.60 2.15 10-350349-183 18 1.0000-20 unef 6-32 unc MS3420-10a ms3420-6a .437 .312 .197 .085 11.10 7.93 5.00 2.15 10-350349-203 20 & 22 1.1875-18 unef 8-32 unc ms3420-12a ms3420-8a .541 .437 .270 .177 13.74 11.10 6.85 4.50 10-350349-243 24 & 28 1.4375-18 unef 8-32 unc ms3420-16a ms3420-12a ms3420-8a .748 .541 .437 .429 .260 .186 19.00 13.74 11.10 10.90 6.60 4.72 10-350349-323 32 1.7500-18 uns .250-20 unc ms3420-20a ms3420-16a ms3420-12a .937 .748 .541 .620 .441 .273 23.80 19.00 13.74 15.74 11.20 6.93 10-350349-363 36 2.0000-18 uns .250-20 unc ms3420-24a ms3420-20a ms3420-16a 1.122 .937 .748 .681 .504 .358 28.50 23.80 19.00 17.30 12.80 9.10 10-350349-403 40 2.2500-16 un .250-20 unc ms3420-28a ms3420-20a ms3420-16a 1.250 .937 .748 .815 512 368 31.75 23.80 19.00 20.70 13.00 9.34 all dimensions for reference only. inches part number used with shell size b e .016 f .008 g + .020 ? .000 open closed 10-350349-123 10sl .312 .094 .748 .890 1.272 10-350349-143 14s .438 .230 .874 1.016 1.272 10-350349-163 16 & 16s .531 .315 1.000 1.106 1.272 10-350349-183 18 .625 .378 1.122 1.220 1.390 10-350349-203 20 & 22 .748 .445 1.311 1.469 1.406 10-350349-243 24 &28 .937 .610 1.559 1.654 1.516 10-350349-323 32 1.250 .921 1.874 2.126 1.764 10-350349-363 36 1.378 .921 2.122 2.248 2.031 10-350349-403 40 1.624 1.177 2.374 2.500 2.031 millimeters b e 0.4 f 0.2 g + 0.5 ? 0.0 open closed 7.93 2.38 19.0 22.6 32.3 11.12 5.84 22.2 25.8 32.3 13.48 8.00 25.4 28.1 32.3 15.87 9.60 28.5 31.0 35.3 19.00 11.30 33.3 37.3 35.7 23.80 15.50 39.6 42.0 38.5 31.75 23.40 47.6 54.0 44.8 35.00 23.40 53.9 57.1 51.6 41.25 29.90 60.3 63.5 51.6 ? waterproof clamp for jacketed cables ? provides mechanical strain relief plus concentric clamping over a wide range of cable sizes ? a neoprene* gland seal ensures a waterproof seal on the cable jacket * other materials available f v e b g a to reduce diameter b, use rubber brushing ms3420a
85 gt ? accessories rear mounting data, panel cut-out dimensions, sealing plugs, sealing ranges rear mounting data maximum panel thickness size dimension d gt00/020 gt030 inches (mm) inches (mm) 10sl .146 3.70 .303 7.70 14s .146 3.70 .303 7.70 16s .146 3.70 .303 7.70 16 .145 3.70 .242 6.15 18 .145 3.70 .303 7.70 20 .145 3.70 .303 7.70 22 .145 3.70 .303 7.70 24 .207 5.25 .303 7.70 28 .207 5.25 .343 8.70 32 .241 6.10 .309 7.85 36 .241 6.10 .309 7.85 40 .237 6.02 .309 7.85 panel cut-out dimensions shell size a dia. hole size connector styles 02, 020, 00, 030 front mount 02, 00, 020 rear mount 030 jam nut 070 jam nut 070 b .004 c dia. c dia. d dia. e 10sl .126 .717 11/16 1 3/4 7/8 .83 14s .126 .906 13/16 1 1 1/8 1.08 16s/16 .126 .969 15/16 1 1/8 1 1/14 1.21 18 .126 1.063 1 1/16 1 1/4 1 3/8 1.32 20 .126 1.157 1 3/16 1 3/8 1 1/2 1.45 22 .126 1.252 1 5/16 1 1/2 1 5/8 1.57 24 .146 1.374 1 7/16 1 5/8 1 3/4 1.70 28 .146 1.563 1 11/16 1 7/8 2 1.95 32 .169 1.752 1 15/16 2 1/8 2 1/4 2.20 36 .169 1.937 2 1/8 2 3/8 2 1/2 2.45 40 .169 2.185 2 3/8 2 5/8 2 3/4 2.70 sealing plug 10-405996-xx sealing plugs are used to fill unused holes in multi-holed grommet configurations. grommet hole sealing ranges hole size sealing range (mm) inches 16 1.62 ? 3.3 .064 ? .130 12 2.89 ? 4.31 .114 ? .170 8 4.16 ? 6.47 .164 ? .255 4 6.9 ? 9.3 .272 ? .370 0 10.5 ? 13.97 .415 ? .550 ** .020 (in.) *** 0.5 (mm) order no. contact size wire size color code inches a dia. .010 b .005 c .010 10-405996-16 16 20-16 blue .083 .133 .564** 10-405996-12 12 14-12 yellow .121 .171 .564** 10-405996-8 8 10-8 red .185 .315 .470 10-405996-4 4 4-6 blue .310 .415 .470 10-405996-0 0 0-2 yellow .440 .605 1.000 millimeters a dia. 0.2 b 0.1 c 0.2 2.1 3.4 14.3*** 3.1 4.3 14.3*** 4.7 8.0 11.9 7.9 10.5 11.9 11.2 15.4 25.4 all dimensions for reference only. d max. b dia. a dia. 45 o c .135 3.4 + 0.8 ? 0.6 mm +.030 ?.025 in. b typ. c dia. a dia. e typ. d dia.
86 crimp contacts crimp contact data application tools part number mating size wire well crimp tools positioner/ die set locator/ color pin contact socket contact silver gold(?d?) silver gold(?d?) 10-40553 10-597160-15d 10-597109-161 10-597109-16d 16s 16-18-20 daniels af8 or equivalent th29-1 or equivalent red 10-606014-40 10-597160-40d 10-597109-401 10-597109-40d 12-14 10-606014-221 10-597160-19d 10-597109-191 10-597109-19d 14-16 10-606014-291 10-597160-34d 10-597109-341 10-597109-34d 20-22 10-606014-46 10-597160-46d 10-597109-461 10-597109-46d 20-24 10-40557 10-597160-16d 10-597109-171 10-597109-17d 16 16-18-20 pin - blue socket - green 10-606014-022 10-597160-22d 10-597109-221 10-597109-22d 12-14 10-606014-171 10-597160-17d 10-597109-141 10-597109-14d 14-16 10-606014-311 10-597160-33d 10-597109-331 10-597109-33d 20-22 10-606014-361 10-597160-36d 10-597109-361 10-597109-36d 20-24 10-606014-121 10-597160-12d 10-597109-131 10-597109-13d 12 12-14 green 10-606014-231 10-597160-23d 10-597109-231 10-597109-23d 8-10 10-606014-251 10-597160-26d 10-597109-261 10-597109-26d 10-12 10-606014-271 10-597160-27d 10-597109-271 10-597109-27d 14-16-18 10-606014-261 10-597160-24d 10-597109-241 10-597109-24d 18-20 10-606014-201 10-597160-20d 10-597109-201 10-597109-20d 20-22 10-40792 10-597160-8d 10-40793 10-597109-8d 8 8 pico 400bhd pico 414da-8n pico pin - 4025 socket - 4026 10-606014-41 10-597160-41d 10-597109-411 10-597109-41d 6 10-606014-321 10-597160-28d 10-606015-321 10-597109-28d 10-12 10-606014-381 10-597160-38d 10-597109-381 10-597109-38d 12-14 10-40564 10-597160-4d 10-40565 10-597109-4d 4 4 pico 414da-4n pico 4043 10-606014-58 10-597160-58d 10-597109-581 10-597109-58d 6 10-606014-331 10-597160-35d 10-597109-351 10-597109-35d 8 10-606014-44 10-597160-44d 10-606015-441 10-597109-44d 10 10-581806-000 10-597160-1d 10-581808-000 10-597159-1d 0 0 pico 414da-0n pico pin - 4042-1 socket - 4042 10-606014-341 10-597160-29d 10-597109-291 10-597109-29d 0-2 10-606014-351 10-597160-30d 10-606015-351 10-597109-30d 4 10-597276-48 10-597276-48d 10-606015-48 10-597109-48d 2/0 2/0 pico 500 pico 514da2/0n pico pin - 6490 10-597276-47 10-597276-47d 10-606015-47 10-597109-47d 4/0 4/0 pico 514da4/0n socket - 6491 machined from copper alloys and silver or gold plated for maximum corrosion resistance, with a mini- mum millivolt drop and a maximum current carrying capacity, the size 16 and 12 socket contacts are of the closed entry design. crimp contacts are available for all ms insert arrangements and are identified with an amphenol ? proprietary number. gt connectors crimp contacts and application tools see page 87 for further contact information applicable to both crimp and solder contacts. additional contact variations including thermocouple and radsok power contacts are available; consult amphenol, sidney, ny for information.
87 machined copper alloy contacts in a full range of sizes, with closed entry socket design in the size 12 and 16 contacts. a heavy silver-plated finish is deposited on all ms style solder con- tacts for maximum corrosion resistance, maximum current carrying capacity and low millivolt drop. gold plated contacts are also available. (see how to order, pg. 88). pin/ socket mating end size wire barrel size allowable wire size test current** amps pin socket 16 short ? 16 16 18 20 22 13 10 7.5 5 pin socket 16 long 16 16 18 20 22 13 10 7.5 5 pin socket 12 12 12 14 23 17 pin socket 88 8 10 46 33 pin socket 44 4 6 80 60 pin socket 00 0 1 2 150 125 100 ** contact ratings as stated are test ratings only. the connector may not withstand full rated current through all contacts continuously. please note that the electrical data given is not an establishment of electrical safe ty factors. this is left entirely in the designer?s hands as he can best determine which peak voltage, switching surges, transients, etc. can be expected in a particular circuit. table i mil-spec contact arrangement service rating ms service rating recommended operating voltage* at sea level effective creepage distance nom. mechanical spacing nom. dc ac (rms) inst. 250 200 1/16 a 700 500 1/8 1/16 d 1250 900 3/16 1/8 e 1750 1250 1/4 3/16 b 2450 1750 5/16 1/4 c 4200 3000 1 5/16 * the values listed in table i represent operating values which include a generous safety factor. it may be nec- essary for some applications to exceed the operating voltages listed here. if this is necessary, designers will find table ii useful for determining the degree to which the recommended values of table i can be exceeded. table ii altitude voltage derating** chart ? not corrected for changes in density due to variations in temperature ** no attempt has been made to recommend operating voltages. the designer must determine his own oper- ating voltage by the application of a safety factor to the above derating chart to compensate for circuit tran- sients, surges, etc. ms service rating nominal distance standard sea level conditions pressure altitude ? 50,000 feet pressure altitude ? 70,000 feet airspace creepage minimum flashover voltage ac (rms) test voltage ac (rms) minimum flashover voltage ac (rms) test voltage ac (rms) minimum flashover voltage ac (rms) test voltage ac (rms) inst. 1/32 1/16 1400 1000 550 400 325 260 a 1/16 1/8 2800 2000 800 600 450 360 d 1/8 3/16 3600 2800 900 675 500 400 e 3/16 1/4 4500 3500 1000 750 550 440 b 1/4 5/16 5700 4500 1100 825 600 480 c 5/16 1 8500 7000 1300 975 700 560 gt connectors solder contacts ? the 10sl, 14s and 16s connectors require short contacts.
|
